Landpower Landscape Ballasted Solar Mounting is applicable to large scale flat roof module installation.It allow solar array to tilt angle 5-30 deg with the roof. The solar racking system can be pre-designed a fixed angle for your request and the support is high Pre-assembled, especially, this system highlights the function that it can be both use as ballasted system by adding tray on the bottom tube,and be fixed directly on the concrete block. The special extruded aluminum rail, the tilt-in module, the clamp kit and the round leg can be high pre-assembly and make the installation easy and quick to save yourlabor cost and time. TECHNICAL INFORMATIONInstall site ：Low profile Roof or flat roofTilt Angle ：5~30 deg (fixed)Building Height：20 mMax Wind Speed：

Landpower Adjustable Triangle Landscape Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with flat roof. The mounting system design provides a strong and sturdy support for solar modules, it can be adjustable angle such as 10~17 degree, 17~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled Triangle Tripod, this Adjustable Triangle Roof Mounting makes the installation easy and quick to save your labor cost and time.TECHNICAL INFORMATIONInstall site  Flat roof or lower profile roofTilt Angle ：10~60 degreeBuilding Height：20 mMax Wind Speed：

Landpower EAST/West Ballasted Roof Solar Mounting System is specifically engineered for non-penetration roofs, which secures the array without damaging the flat roof. It is compatible with both framed photovoltaic modules and unframed thin film modules. This economical system requires no roof penetration and made from lightweight and strong aluminum construction and come with pre-assembled components, they are just require few tools, it is quick and easy to install.TECHNICAL INFORMATIONInstall site ：Flat RoofTilt Angle ： 5-10degModule Orientation: LandscapeBuilding Height：

Landpower Two-Row Landscape Flat Roof Solar Mounting is applicable to large scale flat roof,or low       profile Trapezoidal and Corrugated metal roof  module installation. It allow solar array to tilt angle 5-30 deg with the roof. The solar racking system can be pre-designed a fixed angle for your request and the support is high Pre-assembled, especially, this system highlights the function that it can be both use as ballasted  system by adding tray on the bottom tube,and be fixeddirectly on the concrete block. The special extruded  aluminum rail, the tilt-in module, the clamp kitand the round leg can be high pre-assembly and make the installation easy and quick to save your labor cost and time. TECHNICAL INFORMATIONInstall site ：Low profile Roof or flat roofTilt Angle ：5~30 deg (fixed)Building Height：20 mMax Wind Speed：

Landpower Aluminium Portrait Ground Mounting System (Almost 100% of solar rack components are made of Aluminum ) is equipped with components which made of aluminum for mounting on concrete strip foundations or ground screw. This system highlight quick installation, delivered by preassembled parts, it highly minimized the installation processes. It provides a strong and sturdy mounting structure that is suitable for use in high wind and snow load environments. TECHNICAL INFORMATION                                                                                Installation Site:   Open fieldWind Load:   Up to 60m/sSnow Load:   1.4KN/mApplicable Module:   Framed or FramelessModule Orientation:   Portrait Foundation:  Ground Screw or ConcreteMain Material:   100% Anodized AluminumFastener Material:   Stainless Steel Warranty：Ten years warranty and twenty years’ service life. COMPONENT OVERVIEW The Components of this systems is highly pre-assembled as blow:      *Ground Screw: Landpower engineer various Ground Screws for different soil conditions;   *The Pre-assembled Support: The Ground Mounting Supports come with pre-assembled,    please see unfold support below: INSTALLATION It is quite easy to install this Ground Mounting Systems due to the most of parts are highly pre-assembled, especially the Ground Mounting Support:   FOUNDATION OPTION                (Ground Screw Foundation)                                                 (Concrete Foundation) BENEFITS1, Fast InstallationMost of parts is pre-assembled, especially the supporting leg, together with feature of tilt-in T module design, the system dramatically reduce the installation processes onsite.2, Flexible ApplicationThis system not only can be installed on ground screw for standard circumstance but also installed on concrete foundation for tricky terrain like soft or rocky ground.3, EconomicalThe mounting structure is a cost effective mounting solution. Long rail spans reduces the number of necessary supports and foundations, which also reduces the material cost. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespanAll mounting structural components are made of high anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty. Please click here for the PROJECT REFERENCE!!!  We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all thedetails of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

Landpower Aluminium Landscape Ground Mounting System (Almost 100% of solar rack components are made of Aluminum ) is equipped with components which made of aluminum for mounting on concrete strip foundations or ground screw. This system highlight quick installation, delivered by preassembled parts, it highly minimized the installation processes. It provides a strong and sturdy mounting structure that is suitable for use in high wind and snow load environments. TECHNICAL INFORMATION                                                                                Installation Site:   Open fieldWind Load:   Up to 60m/sSnow Load:   1.4KN/mApplicable Module:   Framed or FramelessModule Orientation:  LandscapeFoundation:  Ground Screw or ConcreteMain Material:   100% Anodized AluminumFastener Material:   Stainless Steel  Warranty：Ten years warranty and twenty years’ service life. COMPONENT OVERVIEWThe Components of this systems is highly pre-assembled as blow:     *Ground Screw: Landpower engineer various Ground Screws for different soil conditions;   *The Pre-assembled Support: The Ground Mounting Supports come with pre-assembled,    please see unfold support below: INSTALLATIONIt is quite easy to install this Ground Mounting Systems due to the most of parts are highly pre-assembled,especially the Ground Mounting Support:                                          (Unfolded Ground Mounting Support) FOUNDATION OPTIONS             (Ground Screw Foundation)                                                 (Concrete Foundation)  BENEFITS1, Fast InstallationMost of parts is pre-assembled, especially the supporting leg, together with feature of tilt-in T module design, the system dramatically reduce the installation processes onsite.2, Flexible ApplicationThis system not only can be installed on ground screw for standard circumstance but also installed on concrete foundation for tricky terrain like soft or rocky ground.3, EconomicalThe mounting structure is a cost effective mounting solution. Long rail spans reduces the number of necessary supports and foundations, which also reduces the material cost. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.4, Long lifespanAll mounting structural components are made of high anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty. Please click there for the PROJECT REFERENCE!!! We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all thedetails of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects. 

Landpower Steel-Strong Solar Ground Mounting System is applicable to a large array photovoltaic system in open terrain. This system is designed to engineer with a minimum amount of installed footing at greatly reduces labor. As the difference foundation solutions, such as concrete with pre-buried bolt, direct buried and ground screw, the system can be modified to be installed. The special tilt-in module, the clamp and the U-bolt make the installation easy and quick. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structure strength and the appearance. TECHNICAL INFORMATIONInstall site：Open groundTilt Angle：10~60degSystem Height：

Pile Driven(Ramming) Ground Mounting is a economic and fast-way installation solutions. By using piledriving machine hydraulically push galvanized steel posts into the ground to the required depth without using poured concrete to support a steel racking systems,it just takes some seconds to finish a piling pole. The racking is strong and cost-effective which adaptable to most terrains.TECHNICAL INFORMATIONInstall site：Open groundTilt Angle：6~50degSystem Height：

Landpower Solar Pole Ground Mounting System is ideal for installation with little space,when shading is an issue, it is also applicable to a large array photovoltaic system in open terrain. This system is designed for seasonal adjustability which can be operated by a single person,this allows the system to quickly make seasonal adjustments to gain all the efficiency and power production of a motorized tracker without the added expense. TECHNICAL INFORMATIONInstall site：Open groundAdjustable Angle：10,20,30,40 degrees(adjustable)System Height：

Landpower Solar Angle Manually Adjustable Ground Mounting System is easy and cost effective mounting system for angle adjustability which can increase the power output up to 15%. Just only need one person to take one minute to adjust your ideal angle(from 0- 60 degree). it is easily to achieve changing the angle by one tool of Handle with torque less than 10 N.m.    TECHNICAL INFORMATIONInstall Site: Open Ground/Flat RoofAdjustable Angle:0-60 degreeNo. Of Person to Adjust one array: 1 PersonTime to Adjust Angles:1 MinuteAdjusting Torque: 

Landpower Aluminum Solar Carport Structures(also known as Canopy Structures) is designed for solar panel installation on parking areas, its single column design allows higher clearances and wider column spacing which ensures more space for car parking. And the material of Carport structures made of high grade Aluminum with corrosion-resistant finishes which putting it at the top of its class in durability,eliability and safety.TECHNICAL INFORMATIONInstall Site: Open fieldMax Wind Speed: Up to 60m/s   Snow Load:1.4KN/㎡Module Type: Framed or Frame lessModule Oriention: Portrait or LandscapeStructure Material: Anodized Aluminum AlloyFasten Material:SUS304 A2-70Finishing: AnodizingFoundation: Concrete or Ballasted Concrete Block INSTALLATION DEMONSTATION                                                           (Single Edge Design)                                                                                                                                       (Double Edge Design)   FEATURE1,Quick and easy installation without foundations,as the provided concrete ballasts are fixed to the ground with anchor bolts and pegs according to soil consistency.The structure can be modular combined and suits parking spaces of any size.2,The support frame allows a perfect static balance, providing high resistance to snow and wind loads.The structure is supplied with a structural analysis report and a12 year guarantee.3,Elegant design: each component has been designed focusing on a clear and stylish shape with a certain purity of lines, able to fit any architectural context.4,The structure consists of silver anodised aluminium profiles and steel joint streated by cataphoresis and coated with polyester powder, a technique used by car manufacturersto protect the mechanical components set in the external lower part of cars. Therefore the structure needs no maintenance.5,The structure is available in a wide range of colours We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects. 

Landpower Steel Solar Carport Structures(also known as Canopy Structures) is designed for solar panel installation on parking areas, its single column design allows higher clearances and wider column spacing which ensures more space for car parking. And the material of Carport structures made of high grade steel with corrosion-resistant finishes which putting it at the top of its class in durability,eliability and safety. TECHNICAL INFORMATION Install Site: Open fieldMax Wind Speed: Up to 60m/s   Snow Load:1.4KN/㎡Module Type: Framed or Frame lessModule Oriention: Portrait or LandscapeStructure Material: Hot Gavanized SteelFasten Material:SUS304 A2-70Finishing: Hot GavanizedFoundation: Concrete/Ground Screw or Ballasted Concrete Block  Single Incline designed carport structuresInstallation Demonstration:Featuresl Most Cost-effective Structuresl No on-site Weldsl Fast Installationl Maximize Parking Spacel Multiple Foundation Options l Corrosion-Resistant  Project Reference:  For carport mounting reference please click here: Solar Carport Structures We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects. INSTALLATION VIDEO REFERENCE: